Fix-A-Floor® Heavy Duty Grout & Tile Cleaner — Step-By-Step Application Guide

This guide walks you through the proper safety precautions and application process for Fix-A-Floor® Heavy Duty Grout & Tile Cleaner. Follow each step closely for optimal performance.

Safety Precautions (Before You Begin)

1. Ensure Proper Ventilation and Personal Protection
• Work in a well-ventilated area to avoid inhaling fumes.
• Wear chemical-resistant gloves, protective eyewear, and long-sleeved clothing to minimize the risk of contact with skin and eyes.
• Avoid all direct skin contact. Do not kneel or sit in the product during use.
• If contact occurs, rinse immediately with water and seek medical attention if irritation persists.

Application Instructions

2. Spot Test First
• Pre-test the solution on an inconspicuous area of the tile or grout to confirm material compatibility and evaluate desired results.
• Follow all application steps during the test to ensure performance before proceeding with full-area use.
3. Apply to Surface
• Using a mop, sponge, or spray bottle, apply the solution evenly across the surface in small to moderate-sized sections.
• This helps maintain control and ensures the product does not dry on the surface before scrubbing.

4. Allow to Dwell
• Let the solution sit undisturbed for 3 to 5 minutes to allow for proper penetration and lifting of soils.
• Do not allow the solution to dry on the surface, as this may leave streaks or residue and reduce cleaning effectiveness.
5. Scrub the Surface
• Use a synthetic tile and grout brush to agitate the solution, loosening dirt, stains, and buildup from the grout lines and tile surface.
• Apply moderate pressure to work the cleaner deep into the grout lines for thorough results.
6. Rinse Thoroughly
• Mop up the dirty solution and rinse the cleaned area thoroughly with clean water to remove all remaining product and residues.
• For best results, perform a final wipe-down with a clean, damp mop or towel.

Clean-Up, Storage, Disposal

• Clean-up with soap and water.
• Store properly sealed and upright in the original container at approx. 77°F (25°C)
• Dispose of in accordance with federal, state, and local regulations.