Fix-A-Floor® Heavy Duty Grout & Tile Cleaner — Step-By-Step Application Guide

Application Instructions

2. Spot Test First
• Pre-test the solution on an inconspicuous area of the tile or grout to confirm material compatibility and evaluate desired results.
• Follow all application steps during the test to ensure performance before proceeding with full-area use.
3. Apply to Surface
• Apply the solution evenly across the surface in small to moderate-sized sections.
• This helps maintain control and ensures the product does not dry on the surface before scrubbing.

4. Allow to Dwell
• Let the solution sit undisturbed for 3 to 5 minutes to allow for proper penetration and lifting of soils.
• Do not allow the solution to dry on the surface, as this may leave streaks or residue and reduce cleaning effectiveness.
5. Scrub the Surface
• Use a synthetic tile and grout brush to agitate the solution, loosening dirt, stains, and buildup from the grout lines and tile surface.
• Apply moderate pressure to work the cleaner deep into the grout lines for thorough results.
6. Rinse Thoroughly
• Mop up the dirty solution and rinse the cleaned area thoroughly with clean water to remove all remaining product and residues.
• For best results, perform a final wipe-down with a clean, damp mop or towel.